Mirror light control

Flexible light control for bathroom, fitting room or shop

  • • connection: 24 V DC / for dynamic luminaires with dynamic plug
  • • with memory function (after cut off from mains the last colour and brightness setting is recovered)
  • • touch sensor
  • | • illuminated 3-way module for gluing behind the mirror
  • | • by using the slide switch 3 functions are selectable:
  • | • function 1: area 1 = on / off; area 2 = light colour; area 3 = brightness; when the motion sensor is connected it switches off after the set time
  • | • function 2: area 1 = 3500 K; area 2 = 2900 K dimmed; area 3 = 5000 K; when the motion sensor is connected it switches to 3500K after the set time
  • | • function 3: area 1 = 3500 K; area 2 = 2900 K dimmed; Feld 3 = 5000 K; also without motion sensor the light colour changes to 3500K after the set time
  • • PIR sensor
  • | • PIR motion sensor without twilight mode for a 20mm drill hole
  • | • 4 preset times adjustable at the module transformer: 16 sec, 3 min, 10min, 30min
  • • IR sensor
  • | • for 14,5 mm drill holes or to glue with enclosed adhesive pad
  • | • 2 functions are selectable by using the push-button at the housing:
  • | • function 1: short approximation = brightness changes from 100 % to 66 % to 33 % to off; long approximation = light colour changes continuously; when the motion sensor is connected it switches off after the set time
  • | • function 2: short approximation = light colour changes from 2700 K to 4000 K to 5000 K to off; long apprximation = brightness changes continuously; when the motion sensor is connected it switches off after the set time